From:	CRDGW2::CRDGW2::MRGATE::"SMTP::CRVAX.SRI.COM::RELAY-INFO-VAX"  1-AUG-1989 08:52
To:	MRGATE::"ARISIA::EVERHART"
Subj:	RE: How to tell DECWindows the difference between color and grey-scale

Received: From KL.SRI.COM by CRVAX.SRI.COM with TCP; Tue,  1 AUG 89 05:18:52 PDT
Received: from LBL.Gov by KL.SRI.COM with TCP; Tue, 1 Aug 89 04:57:18 PDT
Received: from warner.hepnet by LBL.Gov with VMSmail ;
	Tue, 1 Aug 89 04:56:46 PDT
Date:    Tue, 1 Aug 89 04:56:46 PDT
From: nagy%warner.hepnet@LBL.Gov (Frank J. Nagy/VAX Guru&Wizard)
Message-Id: <890801045646.25402fb6@LBL.Gov>
Subject: RE: How to tell DECWindows the difference between color and grey-scale
To: Info-VAX@kl.sri.com
X-St-Vmsmail-To: INFO_VAX

>We have had a problem with DECwindows running on our VAXstation 3200. This is a
>intensity (grey-scales) system and VWS(UIS) always recognized it as such. But
>last week when we tried to run DECwindows it assumed that it was a color
>station. We are running VMS 5.1-1. I could solve the problem by changing in the
>file SYS$MANAGER:DECW$DEVICE.COM the lines...
>... 
>so I have the feeling that there must be a more elegant way to solve the
>problem. Does anyone know another solution or is this a bug in the software?

Yes, look in SYS$MANAGER and find the file DECW$PRIVATE_SERVER_SETUP.TEMPLATE.
Copy this file to DECW$PRIVATE_SERVER_SETUP.COM in sys$specific:[SYSMGR] area
for the grey-scale VS2000 (all the same if not an LAVC machine).  Then
edit DECW$PRIVATE_SERVER_SETUP.COM and reboot the VS2000.

I have a grey-scale VS3200 on my desk with a DECW$PRIVATE_SERVER_SETUP.COM
in its system-specific [SYSMGR] area on the LAVC system disk.  The file
contents are:

$!
$! NAGY:: is a VS-3200, intensity system (B&W monitor)
$!
$ decw$color == "F"
$exit


= Dr. Frank J. Nagy   "VAX Guru & Wizard"
= Fermilab Research Division/Electrical and Electronics Dept/Controls Group
= HEPNET: WARNER::NAGY (43198::NAGY) or FNAL::NAGY (43009::NAGY)
= BitNet: NAGY@FNAL
= USnail: Fermilab POB 500 MS/220 Batavia, IL 60510